|
||
|
Installation Instructions for Small Vinyl Vehicle Stickers. 1. Clean the
area you will be putting the sticker Thank you for purchasing your vehicle stickers from us. I am sure you will find these to be a valuable and enjoyable tool for work or play for may years to come. Like anything there are a few rules to follow to get the best from this product. Feel free to print or save this page for future reference. Installation - These are really very easy to install and in most cases it only takes a moment. Just peel and stick and there you go. To get the most professional installation please follow these easy steps. If you do then you will be pleased with not only the product but the nice job quality job you did. If this email came through correctly and you have a non text based email program this email will contain photos. If you did not receive them and want them please let us know and we will send them to you as an attachment. You will need - a soft cloth, masking tape and either glass cleaner or standard Isopropyl Alcohol (which you can get almost anywhere).  2. Place a small piece of masking tape on each upper corner of the sticker and tape it to the vehicle. Stand back and make sure it looks level or pleasing to the eye.  3. Put a third longer piece of tape along the top of the sticker. If you are installing more than one of these you may want to do this step for all of them before continuing to step 4. This way you will be able to see how they all look before any of them are permanent.  4. Flip the sticker up without removing the tape so that it is now upside-down and facing the vehicle.  5. Start to peel the paper backing off from a corner and fully remove it without letting go of the good part of the sticker. Do not bend the sticker.... bend the paper backing.  6. Keeping the tape on, flip the sticker back down but hold the bottom just slightly away from the vehicle so that none of the stickers adhesive is actually touching the vehicle. Do not pull the sticker tight but keep it taut.  7. With your free hand take your thumb and gently slide it across the sticker from the top at the masking tape right then left while still holding the bottom of the sticker with your other hand and not letting it touch the paint. Keep repeating this working your way down from the top until the entire sticker is adhered to the vehicle. As you are doing this please keep in mind that any area you skip may produce an air bubble. If it does do not tamper with it. Usually the sun will bake it out and you will never know it was there.  8. Peel the face paper off from the corner..... YOU ARE DONE!!! Congratulations!  If you have any questions or concerns please contact us. Click Here to email us |
